1. 服务器/VPS/主机用户Telegram电报群: https://t.me/openos
    黑群晖 Synology Telegram电报群: https://t.me/nasfan
    排除公告

Asrock J3455-ITX DS918+ 1.04b loader for 6.2.3 正常关机，支持转码

本帖由 Ardentwheel 于 2019-03-06 发布。版面名称：群晖 Synology DSM

第 201 页 - 共 265 页
  1. shuko

    shuko New Member

    注册:
    2020-12-15
    帖子:
    1
    2020-12-15 #2001
    先下载，晚点测试一下看看
     
  2. rnker

    rnker New Member

    注册:
    2018-02-25
    帖子:
    3
    2020-12-16 #2002
    换后记得清空/usr/lib/modules/update下的文件才会生效
     
  3. sishuiliu3

    sishuiliu3 New Member

    注册:
    2020-12-16
    帖子:
    1
    2020-12-16 #2003
    谢谢大佬分享教程
     
  4. guyguychou

    guyguychou New Member

    注册:
    2018-11-19
    帖子:
    1
    2020-12-17 #2004
    正好在用J3455，学习一下，感谢
     
  5. jemas_cao

    jemas_cao New Member

    注册:
    2018-09-12
    帖子:
    12
    2020-12-18 #2005
    这样正常吗 为啥我只有两个文件夹 card0 renderD128 没有 controlD64 有没有什么影响？

    代码:
    root@DiskStation:~# ls /dev/dri
card0  renderD128
root@DiskStation:~# cat /sys/kernel/debug/dri/0/i915_frequency_info
Video Turbo Mode: yes
HW control enabled: yes
SW control enabled: no
PM IER=0x00000000 IMR=0xffffffff ISR=0x00000000 IIR=0x00000000, MASK=0x00003ffe
pm_intrmsk_mbz: 0x80000000
GT_PERF_STATUS: 0x000000b1
Render p-state ratio: 0
Render p-state VID: 177
Render p-state limit: 0
RPSTAT1: 0x03000000
RPMODECTL: 0x00000d92
RPINCLIMIT: 0x00004740
RPDECLIMIT: 0x00007f80
RPNSWREQ: 100MHz
CAGF: 100MHz
RP CUR UP EI: 471 (392us)
RP CUR UP: 238 (198us)
RP PREV UP: 0 (0us)
Up threshold: 95%
RP CUR DOWN EI: 476 (396us)
RP CUR DOWN: 238 (198us)
RP PREV DOWN: 0 (0us)
Down threshold: 85%
Lowest (RPN) frequency: 100MHz
Nominal (RP1) frequency: 250MHz
Max non-overclocked (RP0) frequency: 750MHz
Max overclocked frequency: 750MHz
Current freq: 100 MHz
Actual freq: 100 MHz
Idle freq: 100 MHz
Min freq: 100 MHz
Boost freq: 750 MHz
Max freq: 750 MHz
efficient (RPe) frequency: 250 MHz
Current CD clock frequency: 624000 kHz
Max CD clock frequency: 624000 kHz
Max pixel clock frequency: 624000 kHz
     
  6. cy75608

    cy75608 New Member

    注册:
    2020-12-06
    帖子:
    4
    2020-12-18 #2006
    謝謝分享
     
  7. couronne

    couronne New Member

    注册:
    2020-12-18
    帖子:
    2
    2020-12-18 #2007
    謝謝分享
     
  8. 2192513

    2192513 New Member

    注册:
    2020-12-20
    帖子:
    1
    2020-12-20 #2008
     
  9. zntns

    zntns New Member

    注册:
    2019-07-26
    帖子:
    1
    2020-12-20 #2009
    謝謝分享
     
  10. mincer

    mincer New Member

    注册:
    2019-02-05
    帖子:
    20
    2020-12-20 #2010
    你能开启硬件离线转码吗，我和你情况一样，videostation离线转码出错。
     
第 201 页 - 共 265 页