# 替换extra.lzma 替换后记得清空/usr/lib/modules/update下的文件才会生效 代码: Admin@your_DS:~$ sudo -i Password: root@your_DS:~# echo 1 > /proc/sys/kernel/syno_install_flag root@your_DS:~# mkdir -p /mnt/synoboot2 root@your_DS:~# mount /dev/synoboot2 /mnt/synoboot2 root@your_DS:~# ls /mnt/synoboot2 checksum.syno extra2.lzma extra.lzma grub_cksum.syno rd.gz Sone.9 zImage root@your_DS:~# cp /your_path_with_new_extra.lzma/extra.lzma /mnt/synoboot2 root@your_DS:~# cp /your_path_with_new_extra.lzma/extra2.lzma /mnt/synoboot2 root@your_DS:~# rm -rf /usr/lib/modules/update/* root@your_DS:~# reboot 下载地址:(6.2.3_v0.13) 隐藏内容: ******隐藏内容-请回复后再查看****** ******You must reply before you can see the hidden data contained here.****** ⚠️ 注意: 1. 如重新安装系统,记得备份数据, 搜索黑群晖重装,白裙的重装不适用黑群的2. BIOS中建议关闭C-States,设置为sport mode(影响传输速度) 3. 把"OS Selection"设置为Linux(影响启动时间) 代码: amisetupwriter 0x4E2 0x3 有/dev/dri支持转码,没有了内核错误,关机也正常了。 参考: https://xpenology.com/forum/topic/1...-after-upgrade/?do=findComment&comment=118542 https://xpenology.com/forum/topic/14093-hw-transcoding-fix-v104b-ds918 https://xpenology.com/forum/topic/1...er-transcoding/?do=findComment&comment=105533 https://xpenology.com/forum/topic/12952-dsm-62-loader/?page=31&tab=comments#comment-99236 https://xpenology.com/forum/topic/12952-dsm-62-loader/?do=findComment&comment=99491 https://xiking.win/2018/11/05/synology-nas-diy-network/ https://xpenology.com/forum/topic/63876-j3455-xpenology-slow-boot-solution/
按楼主方法在J3455-ITX上试过以下方法,不过没有重装,好像还是无法正常关机/重启,也没有生成/dev/dri节点 用楼主提供的img文件 自己替换extra.lzma 修改启动参数 i915.enable_execlists=0 理论上来说,不追求转码,只希望正常关机/重启的话,是不是应该不需要重装黑群?