商科Thin_mini_5095-AIO_T1主板DS920+ 7.1.0-42661-1引导(正确识别全部六个盘位）

如题，有相同主板的可以直接使用，SATA口为nvme接口转接，转接卡控制芯片为JMB585。
可正确识别全部六块硬盘
DS920+ 7.1.0-42661-1引导：https://pan.baidu.com/s/1zO7EC92rj_1qNDzJ_3h0AQ提取码：rxs3

主板图片：


转接卡：

 

多谢分享，现在我只想怎么硬解的问题

 

我装920+也是想试试能不能直接硬解的，结果不行，如果出922+，可能就行了

 

你这个引导能识别出来主板上的SATA口吗？我看了你的dts文件，好像6个口都指向同一个位置

 

这板子很好，就是不能硬解

 

还真是有点问题，我重新编译看看

 

这不是全都指向了'00:1c.4,00.0’吗

internal_slot@1 {
protocol_type = "sata";
power_pin_gpio = <0x14 0x0>;
detect_pin_gpio = <0x23 0x1>;
led_type = "lp3943";

ahci {
pcie_root = "00:1c.4,00.0";
ata_port = <0x0>;
};

led_green {
led_name = "syno_led0";
};

led_orange {
led_name = "syno_led1";
};
};

internal_slot@2 {
protocol_type = "sata";
power_pin_gpio = <0x15 0x0>;
detect_pin_gpio = <0x24 0x1>;
led_type = "lp3943";

ahci {
pcie_root = "00:1c.4,00.0";
ata_port = <0x1>;
};

led_green {
led_name = "syno_led2";
};

led_orange {
led_name = "syno_led3";
};
};

internal_slot@3 {
protocol_type = "sata";
power_pin_gpio = <0x16 0x0>;
detect_pin_gpio = <0x25 0x1>;
led_type = "lp3943";

ahci {
pcie_root = "00:1c.4,00.0";
ata_port = <0x2>;
};

led_green {
led_name = "syno_led4";
};

led_orange {
led_name = "syno_led5";
};
};

internal_slot@4 {
protocol_type = "sata";
power_pin_gpio = <0x17 0x0>;
detect_pin_gpio = <0x26 0x1>;
led_type = "lp3943";

ahci {
pcie_root = "00:1c.4,00.0";
ata_port = <0x3>;
};

led_green {
led_name = "syno_led6";
};

led_orange {
led_name = "syno_led7";
};
};
internal_slot@5 {
protocol_type = "sata";
power_pin_gpio = <0x18 0x0>;
detect_pin_gpio = <0x27 0x1>;
led_type = "lp3943";

ahci {
pcie_root = "00:1c.4,00.0";
ata_port = <0x4>;
};

led_green {
led_name = "syno_led8";
};

led_orange {
led_name = "syno_led9";
};
};
internal_slot@6 {
protocol_type = "sata";
power_pin_gpio = <0x19 0x0>;
detect_pin_gpio = <0x28 0x1>;
led_type = "lp3943";

ahci {
pcie_root = "00:1c.4,00.0";
ata_port = <0x5>;
};

led_green {
led_name = "syno_led10";
};

led_orange {
led_name = "syno_led11";
};
};

 

嗯，确实有点问题，修改的版本已经上传网盘了

 

主板上的SATA口你有在使用吗？

 

没有，我只用了转接卡的四个